Features:

1. Simple operation, saving manpower 
Automatic re-plating machine can achieve unattended operation. The staff only needs to place the re-plating machine on the defect to be re-plated, add plating solution to the miniature electrolytic cell, and then turn on the power. Rectifier power depends on the time controller, re-plating time is set according to the depth of the defects, the power is automatically cut off when the plating is done, and the staff can trim the plated spot when he is free.
  Automatic re-plating machine occupies very little time of the staff. The staff of each process can take into account defect repair, and won't waste time.
2. No high requirement on technical staff
Manual re-plating of layout defects has high requirements on technical level of the staff, including the control and coordination of temperature, voltage, current, and moving speed of re-plating pen. It is difficult for beginners to master in a short time and achieve high quality re-plating. The operation of automatic re-plating machine is much simpler than manual re-plating machine, voltage and current control can achieve complement (re-plating voltage is high, stirring power of the motor is enhanced to meet the needs of high current density), and qualified coating can be plated according to the temperature of the roller as long as the voltage is controlled within the rated range.
3. High re-plating speed
Forced stirring motor (0.5-3v DC motor) is added in the re-plating process to achieve high current density, enabling high-speed re-plating; the copper layer can be re-plated at 15um/min speed, and all re-plated spots are bright;
4. High quality of re-plated copper layer
Automatic re-plating machine follows the working principle of plating cell, voltage and current are complemented, as long as pre-treatment is done; the hardness and adhesion of re-plated copper layer fully meet the demand for electric carving, and there is no adverse effect on subsequent production processes.
5. Compact, easy to move, high degree of automation
Automatic re-plating machine is about 2kg, equipped with regulated power supply (saving large investment); it can be moved to anywhere and can be used as long as there is a power outlet.